%>

Model Ship Fittings, Accessories & Parts

The largest range of wooden model ship & model boat fittings, accessories & parts available. Modelers Central is the no.1 destination for scratch model ship builders.. There are over 90 model ship fittings categories from anchors to wire, the scratch model boat builder will find what they need here.

All items are listed as single items unless shown otherwise in brackets i.e. (P10) means a packet of 10.

Ships had 3 to 10 anchors depending on the size of the ship. Warships would carry an anchor on each side of the bow with an additional 2 to 4 anchors lashed to the channels. Wooden Ship Model Fittings Anchors come in a range of sizes and shapes.
Wooden Ship Model Fittings Brown Barrel and Yellow Barrel come in a range of different sizes. Small barrels were called firkins and were used to store butter, while larger barrels called casks were used to store water or salt beef. Even larger barrels called tuns were used to store wine.  
Wooden Model Ship Fittings Belaying Pin come in Wood Yellow, Wood Brown, Brass and Black Metal. Belaying Pins were used to secure the running ends of the running rigging. Belaying Pins were plugged into pin rails, fife rails or the rails.  
Wooden Ship Model Fittings Bells and Belfry come in a range of sizes and shapes. The Ship's Bell was considered to be the voice of the ship. The bell was used to mark the beginning of the watches, to give alarm and to give audible warning signals in fog.  
Wooden Ship Model Fittings Binnacles come in a range of sizes and shapes. The Binnacle was used to house the ship's compass.  
Wooden Ship Model Fittings Bitt Head Tops come in a range of sizes and shapes. Bitt heads, along with bollards were used as belaying posts for making heavy ropes fast when the ship was moored at the quayside.  
Wooden Ship Model Fittings Wooden Blocks brown, yellow and fawn come in range of sizes. Blocks were used as pulleys to operate the running rigging of a sailing ship. Single sheave blocks change the direction of pull on the rigging, while double and triple sheave blocks multiply the pulling force exerted by the crew. All stock presented are sold as single items.  
Wooden Ship Model Fittings Blocks Violin come in a range of different sizes. Blocks and tackle operate the rigging of a sailing ship. A Violin Block or Fiddle Block was sometimes used instead of double blocks.
Wooden Model Ship Fittings Bollards Brass and Brown Metal come in a range of different sizes. Bollards were principally used for making heavy ropes fast while the ship was moored at the quayside. Bollards can be Single - Bitt Heads, Double of Triple heads.  
Wooden Ship Model Fittings Boom Yoke. The Boom Yoke or Gaff Jaw was a wooden fork bolted to the heel or inner end of the boom and gaff. The Boom Yoke jaw fitted around the mast which confined the heel and allowed the boom to pivot around the mast.  
Wooden Model Ship Fittings Boats in metal, wood and plastic come in a range of sizes and shapes. From ancient times larger ships carried at least one smaller boat with them. Ship boats could consist of the Long Boat, Barge, Cutter, Gig and Dinghy. Each had its unique purpose.  
Wooden Ship Model Fittings buckets come in a range of sizes and shapes. Buckets came in a variety of shapes and sizes. They were common aboard all ship types. Buckets were used to carry water to fight fires, holy stoning buckets for scrubbing decks, sand buckets for sanding decks and for general fetch and carry work.  
Wooden Ship Model Fittings Cannon Balls come in a range of sizes. Cannon Balls were made of iron which was aimed at the hull of the enemy ship. Chain and bar shot was used against the rigging, while grapeshot was often used against deck crew - grapeshot was 1-2lb iron balls tied to awood mount with ropes, which broke after firing and producing a wide...
Wooden Model Ship Fittings Cannon Barrels come in brass and metal and come in range of sizes and shapes. The earliest cannons were breech load and made from bar iron and hammer welded into the shape of the barrel. The powder charge was held in a separate chamber.  
Wooden Model Ship Fittings Cannon Kits come in brass and metal and come in range of sizes and shapes. Cannon Kits comprise the cannon barrel and carriage. Some are all metal while others come with a wooden carriage. Each will need to be assembled  
Wooden Model Ship Fittings Cannons Underdeck come in brass and metal and come in range of sizes and shapes. The measurement stated refers to the actual length of the barrel.
Wooden Model Ship Fittings Cannon Saddles and Cannon Wheels come in Brass and Wood respectively and in a range of sizes. Cannon Saddles are small brass pieces that are used to hold the cannon barrel in its carriage. All stock presented are sold as single items.  
Wooden Model Ship Fittings Capstans come in wood and brass and come in range of sizes and shapes. A capstan is a vertical-axled rotating machine developed for use on sailing ships to apply force to ropes, cables, and hawsers. The principle is similar to that of the windlass, which has a horizontal axle.
Wooden Model Ship Fittings Carronades come in metal and brass and come in range of sizes.
Wooden Model Ship Fittings Chain in black and brass come in a range of sizes. Measurement is link diameter ie. 1mm. Length of the chain is 1m.  
Wooden Model Ship Fittings Chainplate come in metal and come in range of sizes.
Wooden Model Ship Fittings Cleats come in a range of sizes and shapes.
Wooden Model Ship Fittings Copper Plates Sheathing come in range of sizes. All stock presented are sold as packets of 100 (P100).  
Wooden Model Ship Fittings Culverins Falconet Brass and Metal come in range of sizes.  
Wooden Model Ship Fittings Davits come in a range of sizes and shapes. All stock presented are sold as pairs (P2).  
Wooden Model Ship Fittings Deadeyes come in a range of sizes and shapes.
Wooden Model Ship Fittings Deadeye Heart come in range of sizes.
Wooden Model Ship Fittings Deadeye Loops and Straps come in a range of sizes and shapes.
Wooden Model Ship Fittings Deadeye Chain Strap Assembly come in a range of sizes and shapes. All stock presented are sold as either packets of 10 (P10) or packets of 30 (P30) as shown.  
Wooden Model Ship Fittings Drip Covers come in a range of sizes and shapes.
Wooden Ship Model Fittings Drain Port come in a range of sizes and shapes.
Wooden Model Ship Fittings Eye Screws come in a range of sizes and shapes.
Wooden Model Ship Fittings Eye Pins, Split Pins and Eye Plates come in a range of sizes and shapes. All stock presented are sold in packets as shown - ie P10 means a packet of 10.  
Wooden Model Ship Fittings Fairleads come in a range of sizes and shapes.
Wooden Model Ship Fittings Wooden Gratings come in a range of sizes and shapes.
Wooden Model Ship Fittings Metal Gunports come in a range of sizes. Dimensions stated are the internal measurements of the gunport.
Wooden Model Ship Fittings Metal Gunports Lids and Hinges come in a range of sizes and shapes.
Wooden Model Ship Fittings Ladders come in a range of sizes and shapes. Dimensions: WxSxL W: Width of step, S:Step Height, L: Length of Sides
Wooden Model Ship Fittings Life Buoys come in a range of sizes and shapes.
Wooden Model Ship Fittings Navigation and Search Lights come in a range of sizes and shapes.
Wooden Model Ship Fittings Mast Caps come in a range of sizes and shapes.
Wooden Model Ship Fittings Mast Heels come in a range of sizes.
Wooden Model Ship Fittings Mast Tops come in a range of sizes and shapes.
Wooden Ship Model Fittings Mortar Barrels come in a range of sizes and shapes.
Wooden Ship Model Fittings Nails come in a range of sizes in brass, metal, copper and wood.
Wooden Ship Model Fittings Netting come in a range of sizes and shapes.
Wooden Ship Model Fittings Oars and Oarlocks come in a range of sizes in both wood and plastic.
Wooden Model Ship Fittings Parrels and Parrel Beads come in a range of sizes and shapes.
Wooden Model Ship Fittings Port Holes come in a range of sizes and shapes.
Wooden Model Ship Fittings Propellers come in a range of sizes and shapes.
Wooden Model Ship Fittings Pulley Wheels come in a range of sizes.
Wooden Model Ship Fittings Pumps come in a range of sizes and shapes.
Wooden Model Ship Fittings Brass Railings come in a range of sizes.
Wooden Ship Model Fittings Rigging Cord come in a range of sizes. Our range of rigging cords are presented here. Note that Amati cords tend to be thinner than other brands of the same nominal thickness.  
Wooden Model Ship Fittings Brass Rings come in a range of sizes.
Wooden Model Ship Fittings Rudder Hinges come in a range of sizes.
Wooden Ship Model Fittings Stanchions come in a range of sizes and shapes. A stanchion is any fixed upright support. Our range of stanchions are either wood or brass.  
Wooden Model Ship Fittings Steps come in a range of sizes and shapes. Dimensions: WxSxL W: Width of step, S:Step Height, L: Length of Sides
Wooden Ship Model Fittings Brass Strap comes in a range of sizes. All brass strap lenghths are 500mm
Wooden Ship Model Fittings Tackle Blocks come in a range of sizes.
Wooden Ship Model Fittings Sheaves come in a range of sizes. Wooden pully wheel with hole & groove on outside.  
Wooden Ship Model Fittings Trucks come in a range of sizes.
Wooden Model Ship Fittings Turnbuckles come in a range of sizes and shapes.
Wooden Ship Model Fittings Copper Tube comes in a range of sizes. The copper tube length is 500mm.
Wooden Model Ship Fittings Ventilators come in a range of sizes and shapes.
Wooden Ship Model Fittings Ships Wheels come in a range of sizes and shapes.
Wooden Ship Model Fittings Winches come in a range of sizes and shapes.
Wooden Ship Model Fittings Wire comes in a range of sizes in both brass and stainless steel.
Wooden Ship Model Fittings Yard Spacer